RO treatment system Products Introduction RO membrane is the key part of whole RO, it will decide the system workable or not. The water passing RO can remove bacterial, organic substance and microorganism.No phase change will be generated in RO device during water purification. Water recovery rate is high, small in dimension, high automation.Whole SUS304 rack, automation part apply AC contactor control, apply flow meter, pressure gauge and auto flush electrical magnetic valve, etc.  Protect device：Low pressure and high pressure protect switch is set before water entry and after water discharge. Booster pump and system will stop when water supply is not enough. Make cut off on booster pump when there is too much discharge pressure to avoid system running under pressure exceeding status. Features1.Adopting  with opening design, clear process and convenient maintenance.2.High quality TFC compound  RO membrane treatment crafts with very low pressure and the capacity of desalinization ration comes to 98% at least.3.Auto-check conductance display guarantee watching water quality.4.Multi medium beforehand filter increases the capacity of water treatment.5.Adopts high efficiency active carbon filter which can wipes chlorine of raw water, protect RO membrane and adjust the taste.6.Safe and reliable electrical system design equipment auto stop protection when open circuit\short circuit and creep age.7.Intelligent circuit design equipment auto stop and run when high or low level water.8.RO membrane auto wash and manual wash, which can protect RO membrane easily.Remarks: We can use fiber-glass membrane housing\stainless steel membrane housing\fiber-glass filter tank \stainless steel filter tank and pump

Business Location: