Rubber plug product introduction:Product rubber refers to the production of various rubber products with natural and synthetic rubber as raw material, and also includes the use of rubber products for the production of waste rubber.Basic characteristics of rubber products:1. Rubber molding, after high pressure pressing, because of the elastic body ready within cohesion can not be eliminated, in forming from the mold, tend to produce extremely unstable contraction (rubber shrinkage rate, due to the adhesive used in different), it is necessary to after a period of time to moderate stability. So, when a rubber product design, regardless of the formula or mold, need to be carefully calculated with, if not, it is easy to produce the size of the product is not stable, resulting in low quality products.The 2 is a rubber elastic body of thermosetting plastic is hot, hot to cold setting. Due to the different types of rubber, the main body of different types, the temperature range of curing, there is a considerable gap, and even because of climate change, indoor temperature and humidity. Therefore, the production of rubber products, the need to make a modest adjustment, if no, it may produce the difference of product quality.Various specifications of rubber plug, with the hole without the hole, with a hole, with two holes, manufacturers direct sales, the supply of large quantities of.1. Rubber molding, after high pressure pressing, because of the elastic body ready within cohesion can not be eliminated, in forming from the mold, tend to produce extremely unstable contraction (rubber shrinkage rate, due to the adhesive used in different), it is necessary to after a period of time to moderate stability. So, when a rubber product design, regardless of the formula or mold, need to be carefully calculated with, if not, it is easy to produce the size of the product is not stable, resulting in low quality products.The 2 is a rubber elastic body of thermosetting plastic is hot, hot to cold setting. Due to the different types of rubber, the main body of different types, the temperature range of curing, there is a considerable gap, and even because of climate change, indoor temperature and humidity. Therefore, the production of rubber products, the need to make a modest adjustment, if no, it may produce the difference of product quality.. rubber product is made of rubber materials were dense after mixing machine, mixer made of compound as the raw materials, in mixing according to the required characteristics of rubber products and design formula, and set the product hardness. The product is made of rubber plate curing machine for molding. After the product is formed, the product surface is smooth without burr.4 rubber products aging test belongs to the category of aging, rubber aging refers to the rubber and products in the process of processing, storage and use, due to the combined effect of internal and external factors that cause the performance structure to change, and then lose the use of the phenomenon of value. Is cracked, sticky, hardening, softening, disintegration, discoloration, mildew etc..

Business Location: